SYN-33-C
Overview:
Work Frequency: CDMA450, LTE700 (A/B/C/D), IDEN800, CDMA800, GSM900 & EGSM, DCS1800, PCS1900, CDMA2000, WCDMA2100, AWS2100 and so on.
The small car is just like a big shielding box and it usually cuts off mobile signal. Especially in the tunnel, mountains, forests, wild where is far from the base station, the user couldn’t have a good call in the car.
The wireless car repeater is specially designed to optimize the phone signal in a car. The magnetic antenna on the top of car receives the signal from BTS and transmits the signal to the car booster by cable; the car repeater amplifies the BTS’s signal and transmits the signal to the inside of car. The same way, uplink transmits the signal in opposite direction. So people who used car repeater could have a good call when they when transmitting through the tunnel, mountainous area, forest or gorge.
Wireless car repeater don’t need the mobile phone to be connected, the car repeater would amplify and transmit the signals wirelessly inside the covered areas, therefore people can move around to make a phone call, though they are limited to a 1~3 meter radius.
Electrical specification
|
Uplink
|
Downlink
|
Frequency Range
|
Customized upon request
|
Max .Gain
|
≥ 40dB
|
≥ 45dB
|
Max .Output Power
|
≥ 33dBm
|
≥ 0dBm
|
Band width
|
Wide Band
|
Noise Figure
|
≤6dB
|
VSWR
|
≤1.8
|
Group Delay
|
≤0.5μs
|
Mechanical Specifications
|
Standard
|
I /O Port
|
N-Female
|
Impedance
|
50 ohm
|
Operating Temperature
|
-25ºC~+55ºC
|
Environment Conditions
|
IP40
|
Dimensions
|
Single system
|
95x129x30mm
|
Dual system
|
95x155x30mm
|
Weight
|
Single system
|
≤ 0.8Kg
|
Dual system
|
≤ 1.0Kg
|
Power Supply
|
Input AC90~264V,output DC12V / 3A
|