SYN-QB13~23-F
Overview:
Quad system repeater can provide the customers an integration solution, which can enhance the most of operator's signal and save a lot of antennas and feeders of Indoor Antenna Distribution. Quad system signal repeater series are designed for business places indoor coverage solution. Such as the bookstore, the restaurant, the coffee shop, the KTV, the bar, the parking pot, the super market, big office.... Nowadays, our products can support LTE800+GSM+DCS+WCDMA(LGDW, for short), LTE800+EGSM+DCS-WCDMA(LEDW, for short), EGSM+DCS+WCDMA+LTE800(EDWL, for short) and so on.
Using a revolutionary technology that protects the carrier network, the SYN-QB10-F triple system signal repeater improves indoor cellphone coverage by capturing and repeating the outside signal, bringing it into the building and enhancing it.
This process creates a "Cell Zone" in blind signal area.
Features:
1. Elegant and Compact design
2. Built-in AGC and ALC circuits, which can automatically control the gain of the repeater depending upon the strength of input signals.
3. 31dB MGC(Manual gain control) 1dB one step available for both uplink and downlink to adjust the gain value for proper coverage during installation or maintenance.
4. Auto shut off function available for both uplink and downlink to avoid deep self-oscillations from jamming the towers, saving your trouble from operators.
5. Low power consumption.
Item No. and Frequency:
Item No. Frequecies
SYN-LEDW13~23-F or SYN-LGDW13~23-F
LTE800(Uplink: 832-862Mhz, Downlink: 791-821Mhz)
GSM900(Uplink: 890-915Mhz, Downlink: 935-960Mhz)
DCS1800(Uplink: 1710-1785Mhz, Downlink: 1805-1910Mhz)
WCDMA2100(Uplink: 1920-1980Mhz, Downlink: 2110-2170Mhz)
SYN-EDWL13~23-F or SYN-GDWL13~23-F
EGSM900(Uplink: 880~915MHz, Downlink:925~960MHz)
DCS1800(Uplink: 1710-1785Mhz, Downlink: 1805-1910Mhz)
WCDMA2100(Uplink: 1920-1980Mhz, Downlink: 2110-2170Mhz)
LTE2600(Uplink: 2500~2570MHz, Downlink:2620~2690MHz)
SYN-LCPA10~20-F LTE (A, B, C, D bands is optional)
&CDMA800(Uplink: 824-849Mhz, Downlink: 869-894Mhz)
& PCS1900(Uplink: 1850-1910Mhz. Downlink: 1930-1990Mhz)
& AWS(Uplink: 1710-1755Mhz. Downlink: 2110-2155Mhz)
Coverage:
SYN-QB13~23-F(13~23dBm output power triple system signal repater) 100-2500sq.m coverage.
The signal repeater can combine with Trunk Amplifier to realise bigger area's coverage.
Specifications:
Electrical specification
|
Uplink
|
Downlink
|
Frequency Range
|
Customized upon request
|
Max .Gain
|
SYN-QB13-F
|
≥ 65dB
|
≥ 65dB
|
SYN-QB15-F
|
≥ 65dB
|
≥ 68dB
|
SYN-QB20-F
|
≥ 65dB
|
≥ 70dB
|
SYN-QB23-F
|
≥ 70dB
|
≥ 75dB
|
Max .Output Power
|
SYN-QB13-F
|
≥ 10dBm
|
≥ 13dBm
|
SYN-QB15-F
|
≥ 12dBm
|
≥ 15dBm
|
SYN-QB20-F
|
≥ 15dBm
|
≥ 20dBm
|
SYN-QB23-F
|
≥ 15dBm
|
≥ 23dBm
|
Band width (-3dB)
|
Wide Band
|
MGC ( Step Attenuation )
|
≥ 31dB / 1dB step
|
Automatic Level Control
|
≥ 15dB,auto shut off after 15dB
|
Gain Flatness
|
≤6dB(P-P)
|
Noise Figure
|
≤6dB
|
VSWR
|
≤2.0
|
Group Delay
|
≤0.5μs
|
LED Alarm
|
Standard
|
Power LED
|
Green light when power on.
|
ALC LED
|
Orange @ ALC 1~5dB, Red @ ALC 15dB~20dB, LED off after 5 second red color
|
Mechanical Specifications
|
Standard
|
I /O Port
|
N-Female
|
Impedance
|
50 ohm
|
Operating Temperature
|
-25ºC~+55ºC
|
Environment Conditions
|
IP40
|
Dimensions
|
250x330x106mm
|
Weight
|
≤ 9.0Kg
|
Power Supply
|
Input AC90~264V,output DC10V / 7A
|